Headphone correction · over-ear
Dan Clark Audio Ether C Flow EQ settings for Mac
Dan Clark Audio Ether C Flow is an over-ear headphone. This measured profile applies 10 parametric bands with a -6.2 dB preamp to bring it toward the Harman target. Low end: it reins in what the measurement shows is too much; treble: it adds back what the measurement shows is missing. Biggest single move: +6.4 dB at 4125 Hz (Peak).
The measured correction
| Filter | Frequency | Q | Gain |
|---|---|---|---|
| Peak | 40 Hz | 5.06 | +3.2 dB |
| Peak | 48 Hz | 6.00 | -2.1 dB |
| Peak | 91 Hz | 2.03 | -2.5 dB |
| Low shelf | 105 Hz | 0.70 | +2.1 dB |
| Peak | 261 Hz | 1.83 | -3.2 dB |
| Peak | 513 Hz | 3.40 | +0.6 dB |
| Peak | 939 Hz | 1.06 | -3.3 dB |
| Peak | 4125 Hz | 1.40 | +6.4 dB |
| Peak | 6208 Hz | 6.00 | -1.7 dB |
| High shelf | 10000 Hz | 0.70 | +1.3 dB |
Preamp -6.2 dB · 10 bands · target: Harman · Earwave applies this exactly as listed.
Dan Clark Audio Ether C Flow FAQ
Does Earwave support the Dan Clark Audio Ether C Flow?
Yes. It is one of 812 measured models in Earwave's catalog. Pick it once and everything you play inherits the correction until you switch output.
Do I need the Dan Clark Audio Ether C Flow correction to use Earwave?
No. The 31-band EQ, presets, stereo width and room ambience work on any headphones or speakers. Calibration is a bonus for models someone has measured.
Does the Dan Clark Audio Ether C Flow profile cost extra?
No. Headphone correction is part of Earwave rather than an add-on: no account, no extra purchase, no subscription.
More Dan Clark Audio profiles
Popular models
Hear Dan Clark Audio Ether C Flow properly.
Two minutes to set up. One file to remove.
Get a license key