Headphone correction · in-ear
Anker Soundcore Liberty 4 NC EQ settings for Mac
Anker Soundcore Liberty 4 NC is an in-ear headphone. This measured profile applies 10 parametric bands with a -2.5 dB preamp to bring it toward the Harman target. Low end: it reins in what the measurement shows is too much; treble: it leaves it close to neutral. Biggest single move: -20.0 dB at 5504 Hz (Peak).
The measured correction
| Filter | Frequency | Q | Gain |
|---|---|---|---|
| Peak | 45 Hz | 2.07 | +0.3 dB |
| Peak | 71 Hz | 2.62 | -0.3 dB |
| Low shelf | 105 Hz | 0.70 | -6.6 dB |
| Peak | 105 Hz | 0.87 | -2.1 dB |
| Peak | 258 Hz | 1.50 | -0.1 dB |
| Peak | 579 Hz | 0.94 | +2.4 dB |
| Peak | 1229 Hz | 2.48 | +0.3 dB |
| Peak | 4778 Hz | 0.67 | +17.4 dB |
| Peak | 5504 Hz | 0.77 | -20.0 dB |
| High shelf | 10000 Hz | 0.70 | +2.4 dB |
Preamp -2.5 dB · 10 bands · target: Harman · Earwave applies this exactly as listed.
Anker Soundcore Liberty 4 NC FAQ
Does Earwave support the Anker Soundcore Liberty 4 NC?
Yes. It is one of 812 measured models in Earwave's catalog. Pick it once and everything you play inherits the correction until you switch output.
Do I need the Anker Soundcore Liberty 4 NC correction to use Earwave?
No. The 31-band EQ, presets, stereo width and room ambience work on any headphones or speakers. Calibration is a bonus for models someone has measured.
Does the Anker Soundcore Liberty 4 NC profile cost extra?
No. Headphone correction is part of Earwave rather than an add-on: no account, no extra purchase, no subscription.
More Anker profiles
Popular models
Hear Anker Soundcore Liberty 4 NC properly.
Two minutes to set up. One file to remove.
Get a license key